Time] in the next three screens that appear. Using the keypad, enter the limit value. The Initial Data screen appears. Note Slowly remove the tape attached to the toner cartridge. After the gradation levels are adjusted, the Admin. Close the front door of the finisher. Got it, continue to print.
|Date Added:||26 February 2008|
|File Size:||22.75 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
To Set The “prt Area dup.
When The Message “replace The Toner Cartridge” Appears Do not replace the toner cartridge until the message indicating that it be replaced appears in the touch panel. Remove any misfed paper.
The paper is low. Note Slowly remove the tape attached to the toner cartridge.
Operation Panel Clean the newly exposed surface of the belt printeg wiping it with a soft cloth dampened with a mild household detergent as in step 1. This function is used to specify the length of time after the last operation until the copier automatically enters Low Power mode.
Page Pulling out the paper with too much force may damage the folding unit. This function is used to specify mniolta page order for 4 in 1 copying.
Konica Minolta 8031 Instruction Manual
Close the duplex unit door. FS Staples for staple binding 5, staples are provided in the 831 cartridge. Want to read more? Page 92 Check the print result to make sure that the top margin is adjusted to between 4.
The list of counters is printed. Touch [4in1 Copy Order].
Use only toner that has been manufactured specifically for this copier. Display in Enlarge Display Mode If the hole-punch waste container is full, appears in the screen on the touch panel.
Charger-cleaning tool Used to clean the charger wire, for example, when incorrect copies are produced. The document guides minotla not Slide the document guides positioned along the edges of against the edges of the paper. Page Remove the empty staple cartridge. Display in Enlarge Display Mode Page 51 Page 52 – User’s Choice: Explanation Of Basic Concepts And Symbols During copying, paper is supplied from the right side of the copier peinter fed into the copy tray on the top or the finishing option at the left with the printed surface of the copy facing down.
Page To apply the limit to all accounts, touch [Same for All Dept.
The default setting is [Yes]. Consumables Note Only use toner that has been manufactured specifically for this copier. Empty the hole-punch waste container, and then re-install it according to the following procedure. Curled paper was loaded minnolta Flatten the paper before loading the paper drawer. Print jobs are kojica as a job when the koica for the first page is received. After the test pattern is printed, the screen changes, as shown at the right.
Pull out the paper drawer of the large capacity tray, and then remove any misfed paper. Would highly recommend to others. Color copies have a thicker layer of toner than normal black-and-white copies. When The Message “misfeed Detected. These functions are used to make fine adjustments to the print area margins of a printed image.