And the 2nd pattern can move with the main pattern channel version,Also you can display one pattern onlychannel version. Input power, with inner fuse. This is a unipolar analogue signal whose voltage range is 5V peak-to-peak differential. For example, a digitizer can draw a shape using a “deep blue” colour; when the show plays back, colour channel 4 is used to display the shape. And do not pull the electronic power line. Please keep that there’s no other equipment or decorating materials obstructed the exhaust fan and the vent-pipe when the equipment was working. Ground 0 voltage potential reference and signal shield.

Uploader: Zujind
Date Added: 24 April 2015
File Size: 8.4 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 11515
Price: Free* [*Free Regsitration Required]

If the 10th code is OFF, the codes ilca function code. For example, a digitizer can draw a shape using a “deep blue” colour; when the show plays back, colour channel 4 is used to display the shape.

Yellow supplied on user2 nm to nm. A differential voltage level of V shall represent “rear” or “far from the viewer”.

LazeriĊ³ valdymo programa “I Show”

A differential voltage level of 0V shall place the beam in the center of the screen vertically. Shutter Optical shutter intended to extinguish all light from the graphics scanners.

When used this way, this signal shall represent the right-eye view and the “X” signal shall represent the left-eye view. Download method 2 used MIC: But Pin 4 and Pin 17 not db25g connected in some laser perform interfacial card. This is intended db5f use by projectors db25c use an intensity signal or scanner blanking. When use this equipment, you must turn on the lamp at first and then start the computer. These are intended to keep the projector from outputting light if inadvertently connected to non-laser signal sources such as SCSI, Parallel or serial connectors.

  COMPAQ V3713AU DRIVER DOWNLOAD

USER MANUAL – Nordisk Musik AB

Before connect power, check the plug is immobility or not, power line should be connect well. Computer software control mode Fixture, there has a switch to select control mode – by computer or inside program: Please use the soft cloth to clean the surface of product. Please do not open or close the equipment frequently that’s to avoid any affect to the life span of the laser diode, and try the best to avoid the long time working.

At the same time please pay attention to see if there are some parts enclosed: If you open software before turn on the lamp, please restart the software.

Ild Change For applications using sequential-field stereoscopic techniques, the field selected polarization shall be supplied on the “User-defined signal 4” pair. This is a unipolar analogue signal whose voltage range is 5V peak-to-peak differential. Additional Notes About Signals The absolute maximum voltage on any pin with respect to ground shall be positive or negative 25 volts.

Once after received this products please take and put carefully. Depending on the laser wavelengths used, shows played from ADAT may be weak in dark blue and violet without special hardware “tricks” on the projector. These are paired as differential analogue signals.

  ASKEY ADSL ROUTER USB DRIVER

Shogun 3D+RGB |

The analogue voltage range and polarity are identical to the “X” signal. Don’t separate ildx light personally. For volumetric or stereoscopic applications where it is desired to have a separate signal which indicates depth, this shall be supplied on the “User-defined signal 4” pair.

When the laser diode became dim or damaged please contact the dealer timely. Input power, with inner fuse. In the theory, all the signal of laser perform software that accord with the ILDA Db25 standard can control the fixture.

Blue nm to nm.

Keep space between light equipments and wall more than 0. A differential voltage level of 0V shall represent a neutral distance such as the plane of the screen. See “Colour Channel Usage” section, below. Due to the characteristic of the laser diode, after three hours working, it should be close at least 25 minutes until the laser diode cooling ida work again.

Here’s how this is done: