It’s not really floating. In other words, why doesn’t the two BJTs become turned on at the same time during the transition? Sep 13, 8. What is the voltage of the collector of Q10? The gate is left ‘floating’ at maybe 0. The same works with opposite sign for the bottom transistor.

Uploader: Dogrel
Date Added: 5 April 2011
File Size: 36.51 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 38206
Price: Free* [*Free Regsitration Required]

The gate has a large capacitance and very high resistance so it will tend to stay at 10 volts.

Particularly as I want to make sure it keeps working. To address your question on “Double amplification”, a push pull driver doesn’t necessarily give more amplification, but is used because it is more efficient than a single transistor amplifier because ideally only one transistor is on at a time, and all the current totem-;ole through the load.

Sep 13, 8. They also have polarities, a N channel and a P channel, but for technical reasons the N channel tends to work better. I would like to find a higher voltage transistor, but TIP is all I can come up with for the moment. It essentially reverses the roles of the two devices in SEPP.

Articles Top Articles Search resources.

They have a gate, a source which is usually the currents exit, go figureand a drain again, opposite the name. By clicking “Post Your Answer”, you acknowledge that you have read our updated totem-polle of serviceprivacy policy and cookie policyand that your continued use of the website tktem-pole subject to these policies. Forums New posts Search forums.

  6.13 10.3157 DRIVER

This board isnt finished, no fet driver yet, but I have an earlier itteration with the fet gate pulled up by resistors which is whats driving the genny now, badly I might add. Both caps are 0. In this case, you will not get shoot thru.

I’ll ask SgtWookie to check in and suggest better. In analog push—pull power amplifiers the two output devices operate in antiphase i. Home Questions Tags Users Unanswered. If you think this is a bj side driver you will be unhappy with it.

Its offset starts at about 2V and increases with input voltage to about 5V.

I am desperatly in need of education here They can only be ON when the gate is charging or discharging because Ibe is what turns them on. No, create an account now.

Posted by jdraughn in forum: They have excellent turn on resistances very low valuesand can usually handle more power and current than the leads. Truth is, I don’t have a clue.

To participate you need to register.

transistors – Difference between Push-Pull and Totem-Pole – Electrical Engineering Stack Exchange

And as the bases and emitters are tied together, it is impossible for both these conditions to be true at the same time. The alternative to a push—pull output is a single switch that connects the load either to ground called an open collector or open drain output or to the power supply called an open-emitter or open-source output. I would suggest some side experiments before getting into high power circuits.


I would like to know why doesn’t shoot-through occur in this circuit during the transition time of the clock pulse e. Sep 13, 5.

Push–pull output

This gives efficiency and distortion that is a good compromise between triode or triode-strapped power amplifier circuits and conventional pentode or tetrode output circuits where the screen is fed from a relatively constant voltage source. Bill since your edit my answer dosnt make much sense Lets put the supply part of this to bead for the time being, I know it needs changing but frankly thats not as important, right now, as getting the PWM gate drive to work on the second FET.

There is an assumption on my part this will work. You must log in or register to reply here.