You can adjust the wireless data rate of the AP They reach the AirTies router via the other repeaters in between. The IP address of the AP is Setting the Operating Mode 4. The AP is a 3-in-1 device:

Uploader: Shaktidal
Date Added: 17 August 2012
File Size: 61.92 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 93565
Price: Free* [*Free Regsitration Required]

Wireless Network As a wireless access point, the AP enables mobile devices to access the local network.

Configuring the AP as a Bridge You can include a wired device e. The wireless computers connect to the access point closest to them automatically. Enter the broadcast channel number frequency in this field.

The result will be similar to the one shown below. Add more access points and extend the network the same way. The AP does not need to be connected to a PC during normal operation.

AirTies AP-301 User Manual

Check the box next to the access point you would like to connect to and click “Save”. In the above example, 49dBm satisfies this requirement.

Personalize Wi-Fi — change settings for one AP; network follows. Therefore, the IP address of the computer should be in the You will be prompted for a password to login.

  M-AUDIO MIDISPORT 4X4 USB DRIVER

AirTies AP-301 Free Driver Download (Official)

Restart, Reset to factory settings and Firmware update. Ergonomically designed, with a 10x10x8 cm small form factor, takes up minimum space.

Wireless Security Settings In this window, you will see a list of all the available aap access points that the AP bridge can connect to. You can connect the AirTies AP to a wired router through the Ethernet port to setup a wireless local network and enable your wireless computers to access the Internet. You can see the version of the firmware that is currently on your AP on the “Welcome” screen that appears as soon as you login to the web interface.

Do not use with V AC. At the same time, “Access Point List” will appear under the “Wireless Settings” menu of the web interface.

AirTies AP User manual |

You can adjust the wireless data rate of the AP Internet Explorer, Mozilla Firefox, Netscape. To configure and operate the AP in bridge mode, you need to be directly connected to the Ethernet port. The User Manual is an important resource you can refer to for safe and proper use of your device.

If any of the devices in your wireless network does not support WPA, it is recommended that you choose WEP encryption. In the window that appears, you can enter the MAC addresses of the devices that are permitted to access the AP To find out the MAC Address of your computer: If you would like to use WPA2 encryption in your wireless network, all the wireless terminals in your network need to support WPA2.

  HPPSC 1610 DRIVER DOWNLOAD

AirTies Wireless Networks – Air

You can set the Transmit Power of the AP Wpa2 Security Settings “password” field. Computers on the network connect to the AP with the strongest signal, and reach the router or the wired network through the AirTies Mesh Network.

Configuring the AP as a Repeater Configuring the AP as an Access Point This will take you to the “Network Connections” window. AirTies will not be held responsible in such circumstances. Enter the current password in the “Current Password” field.